M2.5 x 6mm Pozi Raised Countersunk Screws (DIN 966) - Stainless Steel (A2) Description

The M2.5 x 6mm Pozi Raised Countersunk Screws (DIN 966) - Stainless Steel (A2) has the following features:

• DIN 966 Manufacturing Standard
• 6mm Length (L)
• Stainless Steel (A2) Material
• Stainless Steel (A2) Material Specification
• 0.45mm Pitch
• PZ1 Pozi Drive Size
• Natural Finish
• Metric Metric or Imperial?
• M2.5 (2.5mm) Thread Size
• 4.7mm Head Diameter (D)
• 1.5mm Countersunk Height (H)
• 90 Degrees Countersunk Angle (CA)
• 0.6mm Raised Head Height (R)

Discover more about the Pozi Raised Countersunk Screws range.

Accu's range of Pozi Raised Countersunk Screws feature an aesthetically pleasing raised head. Pozi drives are visually similar to standard Phillips drives, but feature four additional radial grooves, which allow for greater surface contact, and increased effectiveness under high-torque applications. Pozi Raised Countersunk Screws are also less likely to cam-out. These components are designed for use alongside Accu's Pozi Drive Bits, and are intended to be fitted into pre-drilled and countersunk holes.

Raised Pozi Countersunk Screw Materials 

Pozi Raised Countersunk Screws are manufactured in a wide range of materials, including Stainless Steel, Aluminium, Brass, Phosphor Bronze and PEEK. Features such as Chemical Blackening and Thread Locking Patches.

Metric Sizes

Pozi Raised Countersunk Screws comply with DIN standard 966, and are available in diameters from M2 through to M8. Lengths of between 3mm and 100mm are also available.