5mm x 50mm T25 Torx Countersunk Masonry Anchors - Yellow Zinc Plated Steel Description
The 5mm x 50mm T25 Torx Countersunk Masonry Anchors - Yellow Zinc Plated Steel has the following features:
- Not Standardised Manufacturing Standard
- Yellow Zinc Plated Steel Material
- Carbon Steel Screw Material Specification
- T25 Drive Size
- Yellow Zinc Plated Finish
- Metric Metric or Imperial?
- Concrete, Brick & Stone For Use With
- 50mm Anchor Length (L)
- 7mm Clearance Diameter
- 25mm Max Fixture Thickness
- 100mm Min Structure Thickness
- 15Nm Tightening Torque
- 5mm Pilot Hole / Drill Size
Discover more about the Torx Countersunk Masonry Anchors range.
The original self-tapping anchor designed for fastening into construction materials such as concrete block, brick and stone, this Thunderbolt™ Masonry Anchor is fitted with a Torx drive to offer high torque transmission during installation and increased resistance to cam out.
This Masonry Screw features a Countersunk head which provides a smooth finish, sitting flush with the mating surface once fixed in place.
Thunderbolt’s specialist self tapping masonry screws are designed to be a one-piece, non-expanding anchor, meaning no wall plug or resin is required to use this fastener for close to edge fixtures.
Torx Countersunk Masonry Anchors are manufactured from Steel in a Zinc & Yellow finish.
Accu’s Torx Countersunk Thunderbolt Masonry Anchors are supplied in metric sizes, with the drill sizes available in 5mm and 6mm options and anchor lengths ranging from 30mm to 150mm.
Torx drive sizes for this range are T25 (for 5mm thread diameter) and T30 (for 6mm diameter).