What are Carriage Bolts?
Carriage bolts are a type of hexagon bolt specialised for use in woodworking, in particular, fastening metal to wood. Carriage bolts are designed with a domed head, which can prevent loosening from one side, an enlarged head shape also prevents the bolt from being pulled through a wooden construction. The presence of a domed head does mean that carriage bolts cannot be installed by methods which push the bolt axially during installation, such as a spanner drill adaptor.
The square head section of a carriage bolt allows it to be installed using a spanner, for improved leverage. A square section also provides some level of locking ability when tightening into soft materials such as wood. An unthreaded section below a carriage bolt’s square section adds strength and resistance to shear forces.
Carriage bolts also provide several secondary benefits, such as the aesthetic appeal of their rounded head, which can give a finished appearance to many applications. Despite being intended for use with wood, carriage bolts have a machine screw thread, and are equally suitable for metal applications. However, carriage bolts may be more difficult to install due to their incompatibility with drill adaptors.
It is important to remember that this definition does vary dependent on manufacturer and country - What is considered a carriage bolt may be coach bolt or lag bolt to another user, so one should always exercise caution to ensure the purchase of the correct bolt.
What are Coach Bolts?
Coach bolts, frequently called coach screws, are self tapping fasteners with the head of a hexagon bolt. Coach bolts are commonly used in fastening wood to metal and wood to wood. The unthreaded section of a coach bolt adds strength to its construction, and makes it more resistant to shear forces when compared to fully thread variants such as self tapping hexagon bolts.
While specialised drives such as the pozi drive are specially designed to resist cam-out, the sturdy hexagon head of a coach bolt is even more resistant to slippage, and is typically more suitable for heavy-duty applications.
Due to their suitability for more heavy-duty applications and their compatibility with larger tooling, coach bolts are generally available in larger sizes than other self tapping screws.
What Is the Difference Between Coach Bolts and Carriage Bolts?
While coach bolts and carriage bolts are distinct screw types, they do share similarities in their general head shape, and the fact that they are suitable for use with wood. The most significant difference is the coach bolt’s presence of a self-tapping thread, which makes it able to create its own threads in timber - by contrast, a carriage bolt features a machine thread, so will always require an adequately sized pilot hole.
The difference in application for these two screw types is also not as simple as boiling down to the difference between a carriage and a coach. Confusingly, carriage and coach are near synonymous terms, and carriage bolts and coach bolts can be found in many designs for both types of vehicle.
While there is little in the way of concrete evidence for the origin of the term ‘carriage bolt’. one theory is that it originates from the Old French ‘cariage’, which does not refer to carriages in a vehicular sense, but is more closely related to the English word ‘carry’, potentially because this type of bolt was meant for load-bearing applications, rather than being specifically designed for use in the manufacture of carriages.
Why Manufacture Coach and Carriage Bolts from Stainless Steel?
Coach bolts and carriage bolts are frequently used in heavy-duty or load-bearing applications, which may make it seem counter-intuitive to use stainless steel in their construction. For applications where tensile strength is of absolute importance, stainless steel fasteners may not be preferable to hardened steel alternatives, but the appeal of stainless steel lies in its chemical resistance.
Coach and carriage bolts are frequently used outdoors, which causes unprotected steel to rust rapidly. Certain wood types are also acidic, and may contain corrosive natural chemicals. In these applications, stainless steel coach screws and carriage bolts are an ideal alternative.