No products
Thread Size (T) | M3 (3mm) |
Thread Length (L) | 6mm |
Head Diameter (D) | 6mm |
Material | Stainless Steel (A2) |
Finish | Natural |
Thread Size (T) | M3 (3mm) |
Thread Length (L) | 12mm |
Head Diameter (D) | 6mm |
Material | Stainless Steel (A2) |
Finish | Natural |
Thread Size (T) | M3 (3mm) |
Thread Length (L) | 10mm |
Head Diameter (D) | 6mm |
Material | Stainless Steel (A2) |
Finish | Natural |
Thread Size (T) | M2 (2mm) |
Thread Length (L) | 5mm |
Head Diameter (D) | 4mm |
Material | Stainless Steel (A2) |
Finish | Natural |
Thread Size (T) | M3 (3mm) |
Thread Length (L) | 8mm |
Head Diameter (D) | 6mm |
Material | Stainless Steel (A2) |
Finish | Natural |
Thread Size (T) | M1.6 (1.6mm) |
Thread Length (L) | 5mm |
Head Diameter (D) | 3.2mm |
Material | Stainless Steel (A2) |
Finish | Natural |
Thread Size (T) | M4 (4mm) |
Thread Length (L) | 10mm |
Head Diameter (D) | 8mm |
Material | Stainless Steel (A2) |
Finish | Natural |
Thread Size (T) | M5 (5mm) |
Thread Length (L) | 8mm |
Head Diameter (D) | 10mm |
Material | Stainless Steel (A2) |
Finish | Natural |
Accu’s Phillips Pan Head Screws are fitted with a standard Phillips head. Phillips heads are widely used throughout the fastener industry, and are ideal for use with Accu’s Phillips Head Screwdrivers and Phillips Head Drive Bits. Phillips Pan Head Screws are designed for use with pre-drilled holes. Pan head screws have straight sides and are flat on the top with no sharp edges.
Phillips Pan Head Screws can be manufactured in a range of materials, including Stainless Steel, Aluminium, Brass, and Phosphor Bronze. Specialist thermoplastics such as PEEK, Polyamide and Nylon are also available. Additional finishes, such as Chemical Blackening and Thread Locking Patches, can be applied to Stainless Steel components on request.
Accu’s Phillips Pan Head Screws are manufactured in accordance with DIN 7985H, and are available as standard in metric sizes ranging from M1.4 up to M10. Lengths of between 2.00mm and 150.00mm are also available.
Imperial Phillips Pan Head Screws are manufactured to the ANSI Standard B18.6.3. Diameters from #0 up to #6, and lengths of between 1/8 inch and 6 inch are available as standard. Additional sizes can be manufactured on request.
High precision, bespoke manufacture of Metric Torx Pan Head Screws to customer specification. State of the art facilities specialising in both small batch prototyping and large scale manufacture.
Get A Quote