8-12mm x 9mm Worm-Drive Hose Clamps - AISI 430 Stainless Steel Description
The 8-12mm x 9mm Worm-Drive Hose Clamps - AISI 430 Stainless Steel has the following features:
- Not Standardised Manufacturing Standard
- Stainless Steel Material
- AISI 430 Stainless Steel Material Specification
- Natural Finish
- 9mm Clip Width (W)
- Metric Metric or Imperial?
- 8mm-12mm Diameter
Discover more about the Worm Drive Hose Clamps range.
Worm Drive Hose Clamps often known as Jubilee Clips are designed to seal hoses onto fittings. They offer greater hose protection than perforated alternatives due to their solid band. When the screw is tightened it meshes with the slots in the band and tightens the clamp. It features a spotwelded house and C7 hexagonal screw. 9mm band width has a recommended maximum tightening torque of 3.0Nm and a 12 millimeter band has a recommended maximum tightening torque of 5.0Nm.
Stainless Steel Jubilee Clip Sizes
The smallest size is a 8 to 12 millimeter internal diameter jubilee clip and large hose clamps go up to size 140 to 160 millimeter internal diamter jubilee clip. We can also manufacture bespoke sizes upon request.
Worm Drive Hose Clamp Materials
Stainless steel band (either A2 or A4) and yellow galvanised steel screw.