300mm [+/-0.03mm] Wide Digital Calipers (Mahr 18 EWR) - UKAS Calibrated Description
The 300mm [+/-0.03mm] Wide Digital Calipers (Mahr 18 EWR) - UKAS Calibrated has the following features:
- Mahr 18 EWR Manufacturing Standard
- Hardened Stainless Steel Material
- Metric/Imperial Metric or Imperial
- Mahr Manufacturer
- Mahr 18 EWR Series
- Digital Display Type
- +/-0.03mm Accuracy
- No Depth Blade
- No Thumb Roller
- 90mm Primary Jaw Length (d)
- N/A Secondary Jaw Length (b)
- Yes Data Output
- 0mm Minimum Measurement
- CR2032 Battery
- Long Length Additional Features
- 0.01mm Resolution
- 410mm Bar Length
- 20mm Bar Width
- 0mm Range (Min)
- 300mm Range (Max)
- UKAS Calibration Calibration Level
Discover more about the Vernier Calipers range.
Vernier Calipers are used to measure distances with far greater accuracy than alternative products such as Rules. Certain Calipers are intended to measure outside distances, whereas others are specifically for use with inside distances. Many Vernier Calipers can measure both outside and inside distances with two separate pairs of jaws. Other features which are available on certain models include USB data outputs, depth gauges, and thumb wheels for greater sliding accuracy.
The name ‘Vernier’ refers specifically to the analogue scale which is used on non-digital calipers – despite this, the term ‘Vernier’ is often used interchangeably for digital and analogue calipers alike.
See our article What Is Metrology? to discover the benefits of Verniers and how they compare to other measuring devices such as micrometers.