170mm [+/-0.03mm] Digital Inside Point Calipers (Mahr 16 EWR-SI) - UKAS Calibrated Description
The 170mm [+/-0.03mm] Digital Inside Point Calipers (Mahr 16 EWR-SI) - UKAS Calibrated has the following features:
- Mahr 16 EWR-SI Manufacturing Standard
- Stainless Steel Material
- Metric Metric or Imperial
- Mahr Manufacturer
- Mahr 16 EWR-SI Series
- Digital Display Type
- +/-0.03mm Accuracy
- No Depth Blade
- No Thumb Roller
- 38mm Primary Jaw Length (d)
- N/A Secondary Jaw Length (b)
- N/A Secondary Jaw Length [Total] (a)
- Yes (MarConnect) Data Output
- 20mm Minimum Measurement
- CR2032 Battery
- Internal Point Jaws Additional Features
- 0.01mm Resolution
- 235mm Bar Length
- 16mm Bar Width
- 20mm Range (Min)
- 170mm Range (Max)
- UKAS Calibration Calibration Level
Discover more about the Vernier Calipers range.
Vernier Calipers are used to measure distances with far greater accuracy than alternative products such as Rules. Certain Calipers are intended to measure outside distances, whereas others are specifically for use with inside distances. Many Vernier Calipers can measure both outside and inside distances with two separate pairs of jaws. Other features which are available on certain models include USB data outputs, depth gauges, and thumb wheels for greater sliding accuracy.
The name ‘Vernier’ refers specifically to the analogue scale which is used on non-digital calipers – despite this, the term ‘Vernier’ is often used interchangeably for digital and analogue calipers alike.
See our article What Is Metrology? to discover the benefits of Verniers and how they compare to other measuring devices such as micrometers.