300mm [+/-0.03mm] Vernier Calipers (Insize 1205) - UKAS Calibrated Description
The 300mm [+/-0.03mm] Vernier Calipers (Insize 1205) - UKAS Calibrated has the following features:
- Insize 1205 / DIN 862 Manufacturing Standard
- Stainless Steel Material
- Metric Metric or Imperial
- Insize Manufacturer
- Insize 1205 Series
- Analogue Scale Display Type
- +/-0.03mm Accuracy
- Square Depth Blade
- No Thumb Roller
- 64mm Primary Jaw Length (d)
- 22mm Secondary Jaw Length (b)
- 27.50mm Secondary Jaw Length [Total] (a)
- No Data Output
- 0mm Minimum Measurement
- N/A Battery
- Vernier Caliper Additional Features
- 0.02mm Resolution
- 414mm Bar Length
- 20mm Bar Width
- 0mm Range (Min)
- 300mm Range (Max)
- UKAS Calibration Calibration Level
Discover more about the Vernier Calipers range.
Vernier Calipers are used to measure distances with far greater accuracy than alternative products such as Rules. Certain Calipers are intended to measure outside distances, whereas others are specifically for use with inside distances. Many Vernier Calipers can measure both outside and inside distances with two separate pairs of jaws. Other features which are available on certain models include USB data outputs, depth gauges, and thumb wheels for greater sliding accuracy.
The name ‘Vernier’ refers specifically to the analogue scale which is used on non-digital calipers – despite this, the term ‘Vernier’ is often used interchangeably for digital and analogue calipers alike.
See our article What Is Metrology? to discover the benefits of Verniers and how they compare to other measuring devices such as micrometers.