150mm [+/-0.05mm] Insize Digital Inside Knife-Edge Calipers (Insize 1123) - UKAS Calibrated Description
The 150mm [+/-0.05mm] Insize Digital Inside Knife-Edge Calipers (Insize 1123) - UKAS Calibrated has the following features:
- Insize 1123 Manufacturing Standard
- Stainless Steel Material
- Metric Metric or Imperial
- Insize Manufacturer
- Insize 1123 Series
- Digital Display Type
- +/-0.05mm Accuracy
- No Depth Blade
- No Thumb Roller
- 60mm Primary Jaw Length (d)
- N/A Secondary Jaw Length (b)
- N/A Secondary Jaw Length [Total] (a)
- Yes Data Output
- 15mm Minimum Measurement
- CR2032 Battery
- Internal Knife-Edge Jaws Additional Features
- 0.01mm Resolution
- 250mm Bar Length
- 16mm Bar Width
- 15mm Range (Min)
- 150mm Range (Max)
- UKAS Calibration Calibration Level
Discover more about the Vernier Calipers range.
Vernier Calipers are used to measure distances with far greater accuracy than alternative products such as Rules. Certain Calipers are intended to measure outside distances, whereas others are specifically for use with inside distances. Many Vernier Calipers can measure both outside and inside distances with two separate pairs of jaws. Other features which are available on certain models include USB data outputs, depth gauges, and thumb wheels for greater sliding accuracy.
The name ‘Vernier’ refers specifically to the analogue scale which is used on non-digital calipers – despite this, the term ‘Vernier’ is often used interchangeably for digital and analogue calipers alike.
See our article What Is Metrology? to discover the benefits of Verniers and how they compare to other measuring devices such as micrometers.