1000mm [+/-0.08mm] Wide Digital Calipers With Thumb Roller (Insize 1117) - UKAS Calibrated Description
The 1000mm [+/-0.08mm] Wide Digital Calipers With Thumb Roller (Insize 1117) - UKAS Calibrated has the following features:
- Insize 1117 Manufacturing Standard
- Stainless Steel Material
- Metric/Imperial Metric or Imperial
- Insize Manufacturer
- Insize 1117 Series
- Digital Display Type
- +/-0.08mm Accuracy
- No Depth Blade
- Yes Thumb Roller
- 150mm Primary Jaw Length (d)
- 67mm Secondary Jaw Length (b)
- Yes Data Output
- 0mm Minimum Measurement
- CR2032 Battery
- Vernier Caliper Additional Features
- 0.01mm Resolution
- 1220mm Bar Length
- 31mm Bar Width
- 0mm Range (Min)
- 1000mm Range (Max)
- UKAS Calibration Calibration Level
Discover more about the Vernier Calipers range.
Vernier Calipers are used to measure distances with far greater accuracy than alternative products such as Rules. Certain Calipers are intended to measure outside distances, whereas others are specifically for use with inside distances. Many Vernier Calipers can measure both outside and inside distances with two separate pairs of jaws. Other features which are available on certain models include USB data outputs, depth gauges, and thumb wheels for greater sliding accuracy.
The name ‘Vernier’ refers specifically to the analogue scale which is used on non-digital calipers – despite this, the term ‘Vernier’ is often used interchangeably for digital and analogue calipers alike.
See our article What Is Metrology? to discover the benefits of Verniers and how they compare to other measuring devices such as micrometers.