No.4 (2.9mm) x 1/2 inch (12.5mm) Slotted Self Tapping Raised Countersunk Screws (DIN 7973C) - Stainless Steel (A2)

No.4 (2.9mm) x 1/2 inch (12.5mm) Slotted Self Tapping Raised Countersunk Screws (DIN 7973C) - Stainless Steel (A2) Description

The No.4 (2.9mm) x 1/2 inch (12.5mm) Slotted Self Tapping Raised Countersunk Screws (DIN 7973C) - Stainless Steel (A2) has the following features:

• No.4 (2.9mm) Thread Size (T)
• 1.7mm Head Length (H)
• DIN 7973C Manufacturing Standard
• 0.8mm Slot Width (A)
• 1.5mm Slot Depth (P)
• Stainless Steel (A2) Screw Material
• Stainless Steel (A2) Screw Material Specification
• 80 degrees Countersunk Angle
• Natural Finish
• 0.9mm Raised Length (R)
• Metric Metric or Imperial?
• 5.5mm Head Diameter (D)
• 2.184mm Pilot Hole Size
• Wood, Plastic & Non-Ferrous Metal (Requires Pilot Hole) For Use With
• 1/2 inch (12.5mm) Nominal Length

Discover more about the Slotted Self Tapping Raised Countersunk Screws - Stainless Steel (A2) range.

A2 Stainless Steel Slotted Self Tapping Raised Countersunk Screws are designed to tap threads into a pre-drilled hole. These components also feature a countersunk head, which allows them to sit flush with the target housing. The raised head of these components gives them an aesthetically appealing finish, and the slotted drive is intended to be easily operated with standard tools such as Slotted Drive Bits or a Slotted Screwdriver.

Materials

These components can be manufactured from A2 and A4 Stainless Steel. Chemical Black Finishes can be applied to all Stainless Steel components.

Imperial Slotted Self Tapping Raised Countersunk Screws

Slotted Self Tapping Raised Countersunk Screws are available in a full range of imperial sizes, from No. 2 up to No. 14, and lengths from ¼ inch to 2.3/4 inch. Additional sizes can also be manufactured according to customer specifications.