M5 x 8mm Phillips Pan Head Machine Screws (DIN 7985H) - Marine Stainless Steel (A4) Description
The M5 x 8mm Phillips Pan Head Machine Screws (DIN 7985H) - Marine Stainless Steel (A4) has the following features:
- 8mm Thread Length (L)
- 3.95mm Head Length (H)
- DIN 7985H Manufacturing Standard
- Marine Stainless Steel (A4) Material
- Marine Stainless Steel (A4) Material Specification
- 0.8mm Pitch
- PH2 Drive Size
- Natural Finish
- Metric Metric or Imperial?
- M5 (5mm) Thread Size
- 10mm Head Diameter (D)
- +0/-0.36mm Head Diameter (D) Tolerance
- +0/-0.3mm Head Length (H) Tolerance
- +/-0.25mm Thread Length (L) Tolerance
Discover more about the Metric Phillips Pan Head Machine Screws range.
Metric Phillips Pan Head Machine Screws feature a widely used Phillips drive, and are designed for use alongside Accu's Phillips Head Screwdrivers and Phillips Head Drive Bits. For more information on the Phillips drive, see our article, What is The Difference Between Phillips and Pozi Drives?
These components also feature a low-profile pan head, which has rounded edges for safety and aesthetics.
Phillips Pan Head Machine Screws are available in a wide range of materials, including Aluminium, Brass, Phosphor Bronze, PEEK, and Stainless Steel. Additional Features such as Thread Locking Patches and Chemical Blackening are also available on Stainless Steel components.
Metric Phillips Pan Head Screws
Phillips Pan Head Machine Screws are manufactured in accordance with DIN 7985H, and are available in metric thread sizes of between M1.2 and M10, and lengths from 1.5mm up to 100mm.
Imperial Phillips Pan Head Screws
Imperial Phillips Pan Head Machine Screws comply with ANSI B18.6.3. These components are available in thread sizes ranging from No. 0 up to No. 12, and lengths of between 1/8 inch and 6 inch as standard.