M1.6 x 16mm Phillips Countersunk Screws (DIN 965H / EN ISO 7046-2) - Marine Stainless Steel (A4) Description

The M1.6 x 16mm Phillips Countersunk Screws (DIN 965H / EN ISO 7046-2) - Marine Stainless Steel (A4) has the following features:

• DIN 965H / EN ISO 7046-2 Manufacturing Standard
• 16mm Length (L)
• Marine Stainless Steel (A4) Material
• Marine Stainless Steel (A4) Material Specification
• 0.35mm Pitch
• PH0 Drive Size
• Natural Finish
• Metric Metric or Imperial?
• M1.6 (1.6mm) Thread Size
• 0.96mm Countersunk Length (H)
• 90 Degrees Countersunk Angle (CA)
• 2.75mm Head Diameter (Min) (D)
• 3mm Head Diameter (Max) (D)
• +2/-0 Degrees Countersunk Angle (CA) Tolerance

Discover more about the Metric Phillips Countersunk Screws range.

Accu’s Metric Phillips Countersunk Screws are fitted with a standard Phillips head. Phillips heads have been widely used throughout the fastener industry since their invention in 1935. Modern engineers may argue that more recent drive types such as Pozi & Torx offer superior torque and less cam out. If you'd like to investigate these modern drive types, please visit our parent countersunk screw category.

Materials

Phillips Countersunk Screws can be manufactured in a range of materials, including Stainless Steel, Aluminium, Brass, and Phosphor Bronze. Specialist thermoplastics such as PEEK, Polyamide, Polycarbonate and Nylon are also available. Additional finishes, such as Chemical Blackening and Thread Locking Patches, can be applied to Stainless Steel components on request.

Metric

Accu’s Phillips Countersunk Screws are manufactured in accordance with DIN 7985H, and are available as standard in metric sizes ranging from M1.2 up to M10. Lengths of between 2.00mm and 150.00mm are also available.

Imperial

Imperial Phillips Countersunk Screws are manufactured to the ANSI Standard B18.6.3. Diameters from #0 up to #6, and lengths of between 1/8 inch and 6 inch are available as standard. Additional sizes can be manufactured on request.