M5 x 60mm Phillips Countersunk Captive Screws (DIN 965H) - Marine Stainless Steel (A4) Description

The M5 x 60mm Phillips Countersunk Captive Screws (DIN 965H) - Marine Stainless Steel (A4) has the following features:

• DIN 965H Manufacturing Standard
• 60mm Length (L)
• 10mm Thread Length (E)
• PH2 Drive
• Marine Stainless Steel (A4) Material
• Marine Stainless Steel (A4) Material Specification
• Natural Finish
• 0.8mm Thread Pitch
• Metric Metric or Imperial?
• M5 (5mm) Thread Size
• 9.2mm Head Diameter (D)
• 2.5mm Countersunk Length (H)
• 50mm Captive Length
• 3.8mm Captive Diameter (C)
• +0/-0.36mm Head Diameter (D) Tolerance
• 90 Degrees Countersunk Angle (CA)
• M5 (5mm) Suitable Captive Washer
• /captive-washers/654119-HACW-M5-A2 Suitable Captive Washer Link

Discover more about the Phillips Countersunk Captive Screws range.

Phillips Countersunk Captive Screws are designed as self-retaining fasteners when used alongside Captive Washers. These fasteners feature a common Phillips drive, making them fully compatible with Accu's range of Phillips Drive Bits and Phillips Screwdrivers. Captive fasteners are commonly used for safety reasons, and are now required by EU law in certain pieces of safety equipment.

Phillips Countersunk Captive Screws are just one of Accu's captive ranges. Accu's full range of Captive fasteners can be found within the Captive Screws range.

To find out more about the applications and manufacture process of Accu's Captive Screw range, please see our What is a Captive Screw? page.

Metric Phillips Countersunk Captive Screws

Phillips Countersunk Captive Screws are manufactured in a range of metric sizes, with thread sizes ranging from M1.4 to M10. Lengths are available from 6mm up to 150mm.

Custom Manufactured Captive Screws

Accu can offer custom manufactured Captive Screw components, manufactured to exact customer specifications. If the product you require is not listed within our standard product ranges, please contact us, or submit a technical drawing to MADEbyACCU.