M2 x 18mm Phillips Countersunk Captive Screws (DIN 965H) - Marine Stainless Steel (A4) Description

The M2 x 18mm Phillips Countersunk Captive Screws (DIN 965H) - Marine Stainless Steel (A4) has the following features:

• DIN 965H Manufacturing Standard
• 18mm Length (L)
• 4mm Thread Length (E)
• PH0 Drive
• Marine Stainless Steel (A4) Material
• Marine Stainless Steel (A4) Material Specification
• Natural Finish
• 0.4mm Thread Pitch
• Metric Metric or Imperial?
• M2 (2mm) Thread Size
• 3.8mm Head Diameter (D)
• 1.2mm Countersunk Length (H)
• 14mm Captive Length
• 1.4mm Captive Diameter (C)
• +0/-0.3mm Head Diameter (D) Tolerance
• 90 Degrees Countersunk Angle (CA)
• /washers-for-captive-screws/14887-HCW-M10-BZP Suitable Captive Washer Link

Discover more about the Phillips Countersunk Captive Screws range.

Phillips Countersunk Captive Screws are designed as self-retaining fasteners when used alongside Captive Washers. These fasteners feature a common Phillips drive, making them fully compatible with Accu's range of Phillips Drive Bits and Phillips Screwdrivers. Captive fasteners are commonly used for safety reasons, and are now required by EU law in certain pieces of safety equipment.

Phillips Countersunk Captive Screws are just one of Accu's captive ranges. Accu's full range of Captive fasteners can be found within the Captive Screws range.

To find out more about the applications and manufacture process of Accu's Captive Screw range, please see our What is a Captive Screw? page.

Metric Phillips Countersunk Captive Screws

Phillips Countersunk Captive Screws are manufactured in a range of metric sizes, with thread sizes ranging from M1.4 to M10. Lengths are available from 6mm up to 150mm.

Custom Manufactured Captive Screws

Accu can offer custom manufactured Captive Screw components, manufactured to exact customer specifications. If the product you require is not listed within our standard product ranges, please contact us, or submit a technical drawing to MADEbyACCU.