6mm x 75mm T30 Torx Pan Head Masonry Anchors - Yellow Zinc Plated Steel

6mm x 75mm T30 Torx Pan Head Masonry Anchors - Yellow Zinc Plated Steel Description

The 6mm x 75mm T30 Torx Pan Head Masonry Anchors - Yellow Zinc Plated Steel has the following features:

• Not Standardised Manufacturing Standard
• Yellow Zinc Plated Steel Material
• Carbon Steel Screw Material Specification
• T30 Drive Size
• Yellow Zinc Plated Finish
• Metric Metric or Imperial?
• 10mm Head Diameter
• Concrete, Brick & Stone For Use With
• 75mm Anchor Length (L)
• 10mm Clearance Diameter
• 30mm Max Fixture Thickness
• 100mm Min Structure Thickness
• 25Nm Tightening Torque
• 6mm Pilot Hole/Drill Size

Discover more about the Torx Pan Head Masonry Anchors range.

Fitted with the popular Torx drive, offering higher torque transmission over traditional drive types, this Thunderbolt™ self-tapping Pan Head Masonry Anchor is used for fastening into construction materials. 

Featuring a Pan Head, so called for its resemblance to an upside down pan, this Masonry Screw is popular with professional builders and the construction industry for applications where a smooth screw head is required for safety and aesthetic purposes.

This All-Metal fastener cuts its own thread into substrates, such as concrete block, brick or stone, during installation. As a one-piece anchor, Thunderbolt components can be used without the need for resin or an accompanying wall plug, meaning this specialist type of self tapping masonry screw is typically chosen for close to edge fixing applications.

Materials

The Thunderbolt Torx Pan Head Masonry Anchors are manufactured in Steel with a Yellow Zinc Plated finish as standard.

Sizes

Accu’s Torx Pan Head Masonry Anchors range are supplied in metric sizes, with the thread diameters (drill sizes) available in both 5mm and 6mm.

Anchor lengths range from 50mm to 100mm. Torx sizes are T25 for the 5mm diameter screws and T30 for screws of 6mm diameter.