M6 x 18mm Low Head Pilot Recess Cap Screws (DIN 6912) - Thread Locking Stainless Steel (A2) Description
The M6 x 18mm Low Head Pilot Recess Cap Screws (DIN 6912) - Thread Locking Stainless Steel (A2) has the following features:
- 4mm Head Length (H)
- DIN 6912 Manufacturing Standard
- 18mm Length (L)
- Stainless Steel (A2) Material
- A2-70 Stainless Steel Material Specification
- 1mm Screw Thread Pitch
- Thread Locking Finish
- Metric Metric or Imperial?
- M6 (6mm) Thread Size
- 10mm Head Diameter (D)
- 2.5mm Socket Depth (P)
- +0/-0.22mm Head Diameter (D) Tolerance
- +0/-0.18mm Head Length (H) Tolerance
- 5mm Socket Size (J)
- 12.5mm Thread Length (Min) (E)
Discover more about the Low Head Pilot Recess Cap Screws range.
Low Head Pilot Recess Cap Screws have a reduced head height for aesthetic and space conservation purposes, and are operated using a Hex Key (also known as an Allen Key) or a Hexagon Socket Drive Bit.
The pilot recess of this component is a cylindrical indent in the centre of the drive point. This recess has a range of uses and advantages, allowing for better drive engagement, use with specialist tools, or even allowing for modification and the creation of tamper-proof drives. An additional application for this feature is to relieve gas buildup, particularly when used within vacuums.
Vented Screws
If Pilot Recess Cap Screws are being considered for use in a vacuum, it is also worth visiting Accu's Vented Screws range. Vented Screws are specially designed to eliminate virtual leaks within vacuums.
Materials
Low Head Pilot Recess Cap Screws are manufactured from A2 and A4 (Marine Grade) Stainless Steel as standard.
Metric
Low Head Pilot Recess Cap Screws are manufactured according to DIN Standard 6912, and are available in metric thread sizes ranging from M3 up to M24, with lengths from 4.00mm up to 150.00mm.