M10 x 25mm Full Thread Bolts (ISO 4017) - Thread Locking Marine Stainless Steel (A4) Description
The M10 x 25mm Full Thread Bolts (ISO 4017) - Thread Locking Marine Stainless Steel (A4) has the following features:
- M10 (10mm) Thread Size (T)
- 6.58mm-6.22mm Head Length (H)
- ISO 4017 Manufacturing Standard
- 25mm Length (L)
- Yes Fully Threaded
- Marine Stainless Steel (A4) Material
- Marine Stainless Steel (A4) Material Specification
- 1.5mm Pitch
- Thread Locking Finish
- +/- 0.13mm General Tolerance
- 16mm-15.73mm Head Width A/F (J)
Discover more about the Metric Full Thread Hexagon Bolts range.
Fully Threaded Hexagon Bolts are designed for use in heavy-duty fastening applications, and feature a hexagonal head for use with a standard spanner. As their name suggests, these fasteners are threaded all the way up to the head of the bolt, making them ideal for installation into pre-threaded holes. Plain Hexagon Bolts, with a reinforced unthreaded shaft section, are also available.
All Full Thread Hexagon Headed Bolts are precision rolled to achieve general tolerances of +/-0.13mm. These components feature a full thread which runs the entire length of the bolt's shaft, and are designed for use alongside Accu's Hexagon Nuts ranges.
Vented Hex Bolt Variant
Accu can also offer this component with a hollow shaft, which allows gases and contaminants to pass through the core of the screw. Vented Hexagon Bolts are commonly used within vacuums.
Fully Threaded Hexagon Bolt Materials
Components within the Full Thread Hexagon Bolts range are available in an array of materials, including A2, A4 and A4-80 Stainless Steel, BUMAX, Brass, Phosphor Bronze, Nylon, Polypropylene, Polyvinylidene and PEEK. Additional features and finishes such as Thread Locking Patches and Chemical Blackening are also available on Accu’s Stainless Steel bolts.
Metric Fully Threaded Hexagon Bolts
Metric Full Thread Hexagon Headed Bolts manufactured according to DIN 933, and are available in diameters ranging from M2 up to M20. Lengths of between 3.00mm and 200.00mm are also available as standard. Non-Standard sizes are available on request.
Imperial Fully Threaded Hexagon Bolts
Imperial Full Thread Hexagon Headed Bolts are available in a number of thread diameters, ranging from No. 4 up to 1 inch, and lengths of between 1/4 inch and 12 inch. These components are manufactured to ANSI B18.6.3. Additional sizes are also available on request.