0.5 MOD - 18 Teeth - 8mm Face Width, K2-Type Precision Spur Gears - Brass Description
The 0.5 MOD - 18 Teeth - 8mm Face Width, K2-Type Precision Spur Gears - Brass has the following features:
10mm Outside Diameter (OD)
Brass, CuZn38Pb2/CuZn39Pb3 Material Specification
0.5 MOD Pitch
18mm Width (W)
18 Number of teeth
3mm Bore Diameter (B)
8mm Face Width (FW)
20 degrees Pressure Angle
9mm Pitch Circle Dia. (PCD)
10mm Hub Diameter (H)
Individual Sold As
Round Bore, M3 (Set Screw Sold Separately) Fastening Type
Solid Hub Type
Discover more about the Spur Gears range
Spur Gears are sold in individual pieces, and are one of the most fundamental components in any parallel drivetrain. This range includes simple round Gears, which are highly versatile, and see frequent use in many of power transmission mechanisms. Spur Gears can be used in a gear train to transmit rotary motion, or with a Precision Rack to convert rotary motion into linear motion. Spur Gears can be accurately spaced using supporting components such as Spacers or Shim Washers.
Spur Gear Materials
Spur Gears can be manufactured from a wide range of materials, including Mild and Stainless Steel, Brass and also engineering plastics, such as Delrin 500, Nylon 6, and Hostaform C.
Spur Gear Sizing
This range of Gears is available in pitches ranging from 0.5 MOD up to 8 MOD, and teeth numbers of between 12 and 150. All of these components are manufactured to a grade 9 AGMA standard, with non-standard sizes and modifications available on request.