30mm Wire Snap Ring For Bores (DIN 9926) - Black A1 Stainless Steel Description
The 30mm Wire Snap Ring For Bores (DIN 9926) - Black A1 Stainless Steel has the following features:
DIN 9926 (DIN 7993B) Manufacturing Standard
Stainless Steel (A1) Material
Stainless Steel (A1) Material Specification
Matte Black Finish
Metric Metric or Imperial
30mm Bore Diameter (d)
32.8mm Ring Outer Diameter (Max) (D)
2mm Ring Thickness (T)
10mm Opening (A)
Discover more about the Wire Snap Rings For Bores range
A type of Retaining Ring that is C-shaped, this component is designed to fit into an internal groove within a bore. Acting as an assembly aid, Round Wire Snap Ring for Bores are used to hold components in place within the housing, preventing lateral movement.
These components work in a similar manner to Internal Circlips, however Snap Rings are not fitted with specially formed ends which aid installation and removal through the use of compatible circlip pliers.
Snap Rings for Bores are typically used in gear systems and vehicle construction. Accu also supplies Wire Snap Rings for Shafts, which are designed to fasten externally to radial grooves on shafts in order to hold components together.
As standard, Accu’s Round Snap Rings are manufactured in 303 Stainless Steel (A1). A chemical matte black finish is also available for this type of Snap Ring.
Produced in accordance with DIN 9926, which replaced DIN 7993B, our range of Round Wire Snap Rings for Bores are available in bore diameters ranging from 7mm to 60mm, with thicknesses from 0.6mm to 3.2mm.