No.10 (4.8mm) x 63mm Sentinel® Pozi Countersunk Security Wood Screws - Zinc Plated Case Hardened Steel Description
The No.10 (4.8mm) x 63mm Sentinel® Pozi Countersunk Security Wood Screws - Zinc Plated Case Hardened Steel has the following features:
63mm Length (L)
Pozi Drive Type
Case Hardened Steel Material
Case Hardened Steel Material Specification
Zinc Plated Finish
3.5mm Head Height (H)
No.10 (4.8mm) Thread Size
9.8mm Head Diameter (D)
1 Way Permanent Screw Fixing Type
High Security Level (4) Security Level
Discover more about the Sentinel® Countersunk Pozi Security Wood Screws range.
Sentinel Countersunk Pozi Security Wood Screws are a type of tamper resistant screw designed to provide a 1-way security solution. Fastening these Security Screws only requires a standard Pozidriv Screwdriver, or a Pozi Drive Bit, meaning a quick and easy installation process.
This screw will only operate (fasten) in a clockwise direction, meaning that the drive of the fixing is a unique permanent pozidrive. This is because the Sentinel® drive of the screw is chamfered on the rear face, preventing engagement with the screwdriver when attempting to remove the screw by turning it anti-clockwise.
The Countersunk head of this Pozi Security Wood Screw is designed to sit flush with the surface of the wooden assembly, whilst the coarse thread of the screw is specially designed to cut into wood and tap its own thread.
This range of Sentinel Security Wood Screws are manufactured from Case Hardened Steel with a Zinc Plated finish (Cr3).
Ranging from thread sizes No.6 (3.5mm) up to No.12 (5.5mm) and in lengths of ¾” (19mm) to 3” (75mm), our range of Sentinel Countersunk Pozi Security Wood Screws are suitable for installations big and small.
These screws can all be fastened with either a PZ2 or PZ3 Pozidrive, with each product page denoting the drive size required in the technical specification.