M2 x 10mm Raised Pozi Countersunk Screws (DIN 966) - Marine Stainless Steel (A4) Description
The M2 x 10mm Raised Pozi Countersunk Screws (DIN 966) - Marine Stainless Steel (A4) has the following features:
M2 (2mm) Thread Size (T)
DIN 966 Manufacturing Standard
10mm Length (L)
Marine Stainless Steel (A4) Material
Marine Stainless Steel (A4) Material Specification
0.5mm Raised Head Height (F)
90 degrees Countersunk Angle
PZ0 Pozi Drive Size
Metric Metric or Imperial?
3.8mm Head Diameter (D)
1.2mm Countersunk Height (H)
Discover more about the Raised Pozi Countersunk Screws range
Accu's range of Raised Pozi Countersunk Screws feature an aesthetically pleasing raised head. Pozi drives are visually similar to standard Phillips drives, but feature four additional radial grooves, which allow for greater surface contact, and increased effectiveness under high-torque applications. Raised Pozi Countersunk Screws are also less likely to cam-out. These components are designed for use alongside Accu's Pozi Drive Bits, and are intended to be fitted into pre-drilled and countersunk holes.
Raised Pozi Countersunk Screw Materials
Raised Pozi Countersunk Screws are manufactured in a wide range of materials, including Stainless Steel, Aluminium, Brass, Phosphor Bronze and PEEK. Features such as Chemical Blackening and Thread Locking Patches.
Raised Pozi Countersunk Screws comply with DIN standard 966, and are available in diameters from M2 through to M6. Lengths of between 3.00mm and 100.00mm are also available.