M4 x 8mm Raised Phillips Countersunk Screws (DIN 966) - Marine Stainless Steel (A4) Description
The M4 x 8mm Raised Phillips Countersunk Screws (DIN 966) - Marine Stainless Steel (A4) has the following features:
DIN 966 Manufacturing Standard
8mm Length (L)
Marine Stainless Steel (A4) Material
Marine Stainless Steel (A4) Material Specification
#2 Drive Size
1mm Raised Length (R)
Metric Metric or Imperial?
M4 (4mm) Thread Size
7.5mm Head Diameter (D)
2.2mm Countersunk Length (H)
90 Degrees Countersunk Angle (CA)
+ 2 Degrees Countersunk Angle (CA) Tolerance
Discover more about the Metric Raised Phillips Countersunk Screws range.
Accu’s Metric Raised Phillips Countersunk Screws are designed to be used alongside our Phillips Head Screwdrivers and Phillips Head Drive Bits. The countersunk head of these components allows them to sit flush with the target housing, and the raised head gives an aesthetically pleasing appearance when installed.
In addition to Stainless Steel, Raised Phillips Countersunk Screws are available in a variety of materials, including Aluminium, Brass, Phosphor Bronze and PEEK. Additional coatings and finishes are available, including Chemical Blackening and Thread Locking Patches.
Metric Raised Phillips Countersunk Screws are manufactured according to DIN standard 965H. Thread sizes of between M2 and M10 are available, and lengths range from 3.00mm to 100.00mm as standard.
Imperial Raised Phillips Countersunk Screws are compliant with ANSI B18.6.3. Diameters of between No. 2 and ¼ inch, and lengths from 3/16 inch up to 2.1/2 inch are available as standard. Non-standard dimensions can be manufactured on request.