M6 x 30mm Raised Phillips Countersunk Screws (DIN 966) - Stainless Steel (A2)

M6 x 30mm Raised Phillips Countersunk Screws (DIN 966) - Stainless Steel (A2) Description

The M6 x 30mm Raised Phillips Countersunk Screws (DIN 966) - Stainless Steel (A2) has the following features:

• M6 (6mm) Thread Size (T)
• DIN 966 Manufacturing Standard
• 30mm Length (L)
• Stainless Steel (A2) Material
• Stainless Steel (A2) Material Specification
• 1mm Pitch
• #3 Drive Size
• 1.5mm Raised Length (F)
• Natural Finish
• Metric Metric or Imperial?
• 11mm Head Diameter (D)
• 3mm Countersunk Length (H)

Discover more about the Metric Raised Phillips Countersunk Screws range

Accu’s Metric Raised Phillips Countersunk Screws are designed to be used alongside our Phillips Head Screwdrivers and Phillips Head Drive Bits. The countersunk head of these components allows them to sit flush with the target housing, and the raised head gives an aesthetically pleasing appearance when installed.

In addition to Stainless Steel, Raised Phillips Countersunk Screws are available in a variety of materials, including Aluminium, Brass, Phosphor Bronze and PEEK. Additional coatings and finishes are available, including Chemical Blackening and Thread Locking Patches.

Metric

Metric Raised Phillips Countersunk Screws are manufactured according to DIN standard 965H. Thread sizes of between M2 and M10 are available, and lengths range from 3.00mm to 100.00mm as standard.

Imperial

Imperial Raised Phillips Countersunk Screws are compliant with ANSI B18.6.3. Diameters of between No. 2 and ¼ inch, and lengths from 3/16 inch up to 2.1/2 inch are available as standard. Non-standard dimensions can be manufactured on request.