M5 x 25mm Raised Phillips Countersunk Screws (DIN 966) - Thread Locking Marine Stainless Steel (A4)

M5 x 25mm Raised Phillips Countersunk Screws (DIN 966) - Thread Locking Marine Stainless Steel (A4) Description

The M5 x 25mm Raised Phillips Countersunk Screws (DIN 966) - Thread Locking Marine Stainless Steel (A4) has the following features:

• M5 (5mm) Thread Size (T)
• DIN 966 Manufacturing Standard
• 25mm Length (L)
• Marine Stainless Steel (A4) Material
• Marine Stainless Steel (A4) Material Specification
• 0.8mm Pitch
• #2 Drive Size
• 1.25mm Raised Length (F)
• Thread Locking Finish
• Metric Metric or Imperial?
• 9.2mm Head Diameter (D)
• 2.5mm Countersunk Length (H)

Discover more about the Metric Raised Phillips Countersunk Screws range

Accu’s Metric Raised Phillips Countersunk Screws are designed to be used alongside our Phillips Head Screwdrivers and Phillips Head Drive Bits. The countersunk head of these components allows them to sit flush with the target housing, and the raised head gives an aesthetically pleasing appearance when installed.

In addition to Stainless Steel, Raised Phillips Countersunk Screws are available in a variety of materials, including Aluminium, Brass, Phosphor Bronze and PEEK. Additional coatings and finishes are available, including Chemical Blackening and Thread Locking Patches.

Metric

Metric Raised Phillips Countersunk Screws are manufactured according to DIN standard 965H. Thread sizes of between M2 and M10 are available, and lengths range from 3.00mm to 100.00mm as standard.

Imperial

Imperial Raised Phillips Countersunk Screws are compliant with ANSI B18.6.3. Diameters of between No. 2 and ¼ inch, and lengths from 3/16 inch up to 2.1/2 inch are available as standard. Non-standard dimensions can be manufactured on request.