M8 x 100mm Raised Phillips Countersunk Screws (DIN 966) - Black Stainless Steel (A2) Description
The M8 x 100mm Raised Phillips Countersunk Screws (DIN 966) - Black Stainless Steel (A2) has the following features:
DIN 966 Manufacturing Standard
100mm Length (L)
Stainless Steel (A2) Material
Stainless Steel (A2) Material Specification
#4 Drive Size
Matte Black Finish
2mm Raised Length (R)
Metric Metric or Imperial?
M8 (8mm) Thread Size
14.5mm Head Diameter (D)
4mm Countersunk Length (H)
90 Degrees Countersunk Angle (CA)
+ 2 Degrees Countersunk Angle (CA) Tolerance
Discover more about the Metric Raised Phillips Countersunk Screws range
Accu’s Metric Raised Phillips Countersunk Screws are designed to be used alongside our Phillips Head Screwdrivers and Phillips Head Drive Bits. The countersunk head of these components allows them to sit flush with the target housing, and the raised head gives an aesthetically pleasing appearance when installed.
In addition to Stainless Steel, Raised Phillips Countersunk Screws are available in a variety of materials, including Aluminium, Brass, Phosphor Bronze and PEEK. Additional coatings and finishes are available, including Chemical Blackening and Thread Locking Patches.
Metric Raised Phillips Countersunk Screws are manufactured according to DIN standard 965H. Thread sizes of between M2 and M10 are available, and lengths range from 3.00mm to 100.00mm as standard.
Imperial Raised Phillips Countersunk Screws are compliant with ANSI B18.6.3. Diameters of between No. 2 and ¼ inch, and lengths from 3/16 inch up to 2.1/2 inch are available as standard. Non-standard dimensions can be manufactured on request.