M1.6 x 3mm Phillips Countersunk Screws (DIN 965H) - Stainless Steel (A2) Description
The M1.6 x 3mm Phillips Countersunk Screws (DIN 965H) - Stainless Steel (A2) has the following features:
M1.6 (1.6mm) Thread Size (T)
DIN 965H Manufacturing Standard
3mm Length (L)
Stainless Steel (A2) Material
Stainless Steel (A2) Material Specification
#0 Drive Size
+/- 0.13mm General Tolerance
Metric Metric or Imperial?
0.96mm Countersunk Length (H)
3.0mm Head Diameter (D) [Max]
2.75mm Head Diameter (D) [Min]
90 degrees Countersunk Angle (CA)
Discover more about the Metric Phillips Countersunk Screws range
Accu’s Metric Phillips Countersunk Screws are fitted with a standard Phillips head. Phillips heads have been widely used throughout the fastener industry since their invention in 1935. Modern engineers may argue that more recent drive types such as Pozi & Torx offer superior torque and less cam out. If you'd like to investigate these modern drive types, please visit our parent countersunk screw category.
Phillips Countersunk Screws can be manufactured in a range of materials, including Stainless Steel, Aluminium, Brass, and Phosphor Bronze. Specialist thermoplastics such as PEEK, Polyamide and Nylon are also available. Additional finishes, such as Chemical Blackening and Thread Locking Patches, can be applied to Stainless Steel components on request.
Accu’s Phillips Countersunk Screws are manufactured in accordance with DIN 7985H, and are available as standard in metric sizes ranging from M1.4 up to M10. Lengths of between 2.00mm and 150.00mm are also available.
Imperial Phillips Countersunk Screws are manufactured to the ANSI Standard B18.6.3. Diameters from #0 up to #6, and lengths of between 1/8 inch and 6 inch are available as standard. Additional sizes can be manufactured on request.