M6 x 70mm T30 Torx Pan Head Screws (ISO 14583) - Thread Locking Marine Stainless Steel (A4)

M6 x 70mm T30 Torx Pan Head Screws (ISO 14583) - Thread Locking Marine Stainless Steel (A4) Description

The M6 x 70mm T30 Torx Pan Head Screws (ISO 14583) - Thread Locking Marine Stainless Steel (A4) has the following features:

• M6 (6mm) Thread Size (T)
• 70mm Thread Length (L)
• 4.6mm Head Length (H)
• ISO 14583 Manufacturing Standard
• T30 Torx Size
• Marine Stainless Steel (A4) Material
• Marine Stainless Steel (A4) Material Specification
• 1mm Screw Thread Pitch
• Thread Locking Finish
• 12mm Head Diameter (D)
• Metric Metric or Imperial

Discover more about the Metric Torx Pan Head Screws range

Accu’s Phillips Pan Head Screws are fitted with a standard Phillips head. Phillips heads are widely used throughout the fastener industry, and are ideal for use with Accu’s Phillips Head Screwdrivers and Phillips Head Drive Bits. Phillips Pan Head Screws are designed for use with pre-drilled holes. Pan head screws have straight sides and are flat on the top with no sharp edges. 

Torx Pan Head Materials

Phillips Pan Head Screws can be manufactured in a range of materials, including Stainless Steel, Aluminium, Brass, and Phosphor Bronze. Specialist thermoplastics such as PEEK, Polyamide and Nylon are also available. Additional finishes, such as Chemical Blackening and Thread Locking Patches, can be applied to Stainless Steel components on request.

Metric Torx Pan Head Screws

Accu’s Phillips Pan Head Screws are manufactured in accordance with DIN 7985H, and are available as standard in metric sizes ranging from M1.4 up to M10. Lengths of between 2.00mm and 150.00mm are also available.

Imperial Torx Pan Head Screws

Imperial Phillips Pan Head Screws are manufactured to the ANSI Standard B18.6.3. Diameters from #0 up to #6, and lengths of between 1/8 inch and 6 inch are available as standard. Additional sizes can be manufactured on request.