M12 X 25mm Dog Point Set / Grub Screws (DIN 915) - 14.9 Hardened Steel Description
The M12 X 25mm Dog Point Set / Grub Screws (DIN 915) - 14.9 Hardened Steel has the following features:
M12 (12mm) Thread Size (T)
DIN 915 Manufacturing Standard
25mm Length (L)
6mm Socket Head A/F (J)
4.8mm Min Socket Head Depth (T)
14.9 Hardened Steel Material
14.9 Hardened Steel Material Specification
6mm-6.30mm Dog Point Length
Metric Metric or Imperial?
8.5mm Dog Point Diameter (DP)
Discover more about the Metric Dog Point Set / Grub Screws range
Metric Dog Point Set Screws (also called Grub Screws) are designed with an extended flat tip, which is used to guide these parts into pre-drilled holes. The extended tip is most commonly used to locate into a machined groove on a shaft. Dog Point Set Screws are also used to increase efficiency on automated assembly lines. These components are ideal for use alongside Accu's Socket Drive Bits and Hex Key ranges.
Metric Dog Point Grub Screw Materials
Dog Point Set Screws can be manufactured in a wide array of materials, including Aluminium, Brass, Phosphor Bronze, PEEK, as well as our standard range of 14.9 Hardened Steel and A1, A2 and A4 Stainless Steel options. Chemical Black Coatings are also available on Stainless Steel components.
Metric Dog Point Set Screw Sizes
Metric Dog Point Set Screws are available in Diameters ranging from M2 up to M20, and lengths of between 3.00mm and 90.00mm.