No products
Metric or Imperial | Metric |
Thread Size | M12 (12mm) |
Nut Width A/F (F) | 18.67mm - 19mm |
Pitch | 1.25 |
Material | Grade 8 Carbon Steel - Zinc Plated |
Metric or Imperial | Metric |
Thread Size | M12 (12mm) |
Nut Width A/F (F) | 19mm |
Pitch | 1.5mm |
Material | A2 Stainless Steel |
Metric or Imperial | Metric |
Thread Size | M10 (10mm) |
Nut Width A/F (F) | 16.73mm - 17mm |
Pitch | 1.0mm |
Material | Grade 8 Carbon Steel - Zinc Plated |
Metric or Imperial | Metric |
Thread Size | M16 (16mm) |
Nut Width A/F (F) | 23.67mm - 24mm |
Pitch | 1.5mm |
Material | Grade 8 Carbon Steel - Zinc Plated |
Metric or Imperial | Metric |
Thread Size | M10 (10mm) |
Nut Width A/F (F) | 16.73mm - 17mm |
Pitch | 1.25mm |
Material | Grade 8 Carbon Steel - Zinc Plated |
Metric or Imperial | Metric |
Thread Size | M18 (18mm) |
Nut Width A/F (F) | 27mm |
Pitch | 1.5mm |
Material | A2 Stainless Steel |
Metric or Imperial | Metric |
Thread Size | M16 (16mm) |
Nut Width A/F (F) | 24mm |
Pitch | 1.5mm |
Material | A4 Stainless Steel |
Metric or Imperial | Metric |
Thread Size | M18 (18mm) |
Nut Width A/F (F) | 27mm |
Pitch | 1.5mm |
Material | A4 Stainless Steel |
Fine Pitch Hexagon Nylon Locking Nuts (also called Nyloc Nuts) are fitted with a polymer insert. The elastic Nylon insert of this component fits tightly against the fastener, and is designed to resist loosening. These components are manufactured with a metric fine pitch, which gives them increased thread-to-thread contact and enhanced holding ability.
Nylon Locking Nuts can be manufactured from A2 and A4 (Marine Grade) Stainless Steel.
Fine Pitch Hexagon Nylon Locking Nuts are available in a range of sizes. Thread sizes are available between M8 and M24.
High precision, bespoke manufacture of Fine Pitch Hexagon Nylon Locking Nuts to customer specification. State of the art facilities specialising in both small batch prototyping and large scale manufacture.
Get A Quote