No products
Free shipping Shipping
$0.00 Total
Buy YG-1 Cutting Tools Components
Worldwide Cutting Tool Manufacturer YG-1 have been supplying equipment to engineers since 1981. The YG-1 range includes Milling Cutters, Drills, Reamers and Thread Mills for a variety of industrial applications.
1 - 8 of 4977 products in YG-1 Cutting Tools.
Save Up To 9% ![YG-1 Cutting Tools]()
8mm x 3 Flute Alu-Power Carbide Wave-Cut Slot Drill - E5D74 (YG-1)
| Diameter (d1) | 8mm |
| No. Of Flutes | 3 Flute |
| End Profile | Square |
| Material | Carbide - Uncoated |
| Used With | Carbon Steel, Alloy Steel, Pre Hardened Steel, Stainless Steel, Cast Iron, Copper, Aluminium |
Save Up To 9% ![YG-1 Cutting Tools]()
4mm x 3 Flute Lapped Alu-Power Carbide Short Length Reduced Neck Slot Drill, 30mm Reach E5E83 (YG-1)
| Diameter (d1) | 4mm |
| No. Of Flutes | 3 Flute |
| End Profile | Square |
| Material | Carbide - Uncoated |
| Used With | Carbon Steel, Alloy Steel, Pre Hardened Steel, Stainless Steel, Cast Iron, Copper, Aluminium |
Save Up To 9% ![YG-1 Cutting Tools]()
1.5mm x 3 Flute Lapped Alu-Power Carbide Short Length Reduced Neck Slot Drill, 16mm Reach E5E83...
| Diameter (d1) | 1.5mm |
| No. Of Flutes | 3 Flute |
| End Profile | Square |
| Material | Carbide - Uncoated |
| Used With | Carbon Steel, Alloy Steel, Pre Hardened Steel, Stainless Steel, Cast Iron, Copper, Aluminium |
M10 Spiral Flute Left Hand Machine Taps - Bright Finish HSS-E (UFS E24M-LH)
| Tap Size (D1) | M10 (10mm) |
| Thread Pitch | 1.5mm |
| Tap Length (L2) | 20mm |
| Total Length (L1) | 100mm |
| Shaft Diameter (Sh) | 10mm |
Save Up To 9% ![YG-1 Cutting Tools]()
12mm x 3 Flute Lapped Alu-Power Carbide Short Length Reduced Neck Slot Drill, 36mm Reach E5E50...
| Diameter (d1) | 12mm |
| No. Of Flutes | 3 Flute |
| End Profile | Square |
| Material | Carbide - Uncoated |
| Used With | Carbon Steel, Alloy Steel, Pre Hardened Steel, Stainless Steel, Cast Iron, Copper, Aluminium |
Save Up To 9% ![YG-1 Cutting Tools]()
16mm x 3 Flute Lapped Alu-Power Carbide Short Length Slot Drill - E5E49 (YG-1)
| Diameter (d1) | 16mm |
| No. Of Flutes | 3 Flute |
| End Profile | Square |
| Material | Carbide - Uncoated |
| Used With | Carbon Steel, Alloy Steel, Pre Hardened Steel, Stainless Steel, Cast Iron, Copper, Aluminium |
Save Up To 9% ![YG-1 Cutting Tools]()
20mm x 75mm x 3 Flute Lapped Alu-Power Carbide Slot Drill - E5D70 (YG-1)
| Diameter (d1) | 20mm |
| No. Of Flutes | 3 Flute |
| End Profile | Square |
| Material | Carbide - Uncoated |
| Used With | Carbon Steel, Alloy Steel, Pre Hardened Steel, Stainless Steel, Cast Iron, Copper, Aluminium |
Save Up To 9% ![YG-1 Cutting Tools]()
8mm x 65mm x 3 Flute Lapped Alu-Power Carbide Slot Drill - E5D70 (YG-1)
| Diameter (d1) | 8mm |
| No. Of Flutes | 3 Flute |
| End Profile | Square |
| Material | Carbide - Uncoated |
| Used With | Carbon Steel, Alloy Steel, Pre Hardened Steel, Stainless Steel, Cast Iron, Copper, Aluminium |
Recently Viewed Components
You've not discovered any products yet.
Log in to view your projects.