No products
Diameter (D) | 32mm |
Length (H) | 160mm |
ISO | HSK63-F |
Speed | 20000rpm |
Balance Rating | G2.5 |
Diameter (D) | 32mm |
Length (H) | 100mm |
ISO | HSK100-A |
Speed | 15000rpm |
Balance Rating | G6.3 |
Diameter (D) | 32mm |
Length (H) | 160mm |
ISO | HSK100-A |
Speed | 15000rpm |
Balance Rating | G6.3 |
Diameter (D) | 22mm |
Length (H) | 100mm |
ISO | HSK100-A |
Speed | 15000rpm |
Balance Rating | G6.3 |
Diameter (D) | 22mm |
Length (H) | 160mm |
ISO | HSK100-A |
Speed | 15000rpm |
Balance Rating | G6.3 |
Diameter (D) | 28mm |
Length (H) | 100mm |
ISO | HSK100-A |
Speed | 15000rpm |
Balance Rating | G6.3 |
Diameter (D) | 28mm |
Length (H) | 160mm |
ISO | HSK100-A |
Speed | 15000rpm |
Balance Rating | G6.3 |
Diameter (D) | 42mm |
Length (H) | 100mm |
ISO | HSK100-A |
Speed | 15000rpm |
Balance Rating | G6.3 |
HSK ER Collet Chucks use a hollow shank, with a clamping mechanism which operates from the inside.
HSK ER Collet Chucks mount to the working side of a lathe spindle. HSK ER Collet Chucks in this range use the machine’s existing hydraulic cylinder and drawtube for actuation.
HSK ER Collet Chucks are particularly advantageous for turning at especially high amounts of spindle rpm.The installation of an HSK ER Collet Chuck usually requires the fitment of an intermediate adapter between the drawtube and chuck to compensate for position and thread disparities. These can be found in Accu’s ER Collets range.
High precision, bespoke manufacture of HSK ER Collet Chucks to customer specification. State of the art facilities specialising in both small batch prototyping and large scale manufacture.
Get A Quote