M4 x 35mm Dog Point Set / Grub Screws (DIN 915 / ISO 4028) - Thread Locking Marine Stainless Steel (A4) Description

The M4 x 35mm Dog Point Set / Grub Screws (DIN 915 / ISO 4028) - Thread Locking Marine Stainless Steel (A4) has the following features:

• DIN 915 / ISO 4028 Manufacturing Standard
• 35mm Length (L)
• Marine Stainless Steel (A4) Material
• Marine Stainless Steel (A4) Material Specification
• Thread Locking Finish
• 0.7mm Thread Pitch
• Metric Metric or Imperial?
• M4 (4mm) Thread Size
• 2.25mm-2.5mm Dog Point Diameter (DP)
• 2.5mm Min Socket Head Depth (P)
• 2mm-2.25mm Dog Point Length (T)
• 2mm Socket Size (J)

Discover more about the Metric Socket Head Dog Point Set / Grub Screws range.

Metric Socket Head Dog Point Set Screws (also called Grub Screws) are designed with an extended flat tip, which is used to guide these parts into pre-drilled holes. The extended tip is most commonly used to locate into a machined groove on a shaft. Dog Point Set Screws are also used to increase efficiency on automated assembly lines. These components are ideal for use alongside Accu's Socket Drive Bits and Hex Key ranges.

Metric Dog Point Grub Screw Materials

Dog Point Set Screws can be manufactured in a wide array of materials, including Aluminium, Brass, Phosphor Bronze, PEEK, as well as our standard range of 14.9 Hardened Steel and A1, A2 and A4 Stainless Steel options. Chemical Black Coatings are also available on Stainless Steel components.

Metric Dog Point Set Screw Sizes

Metric Dog Point Set Screws are available in Diameters ranging from M2 up to M20, and lengths of between 2mm and 120mm.