No.8 (4.2mm) x 38mm Pan Head Torx Self Drilling Security Screws - Delta Protekt® Case Hardened Steel Description
The No.8 (4.2mm) x 38mm Pan Head Torx Self Drilling Security Screws - Delta Protekt® Case Hardened Steel has the following features:
- 38mm Length (L)
- Case Hardened Steel Material
- Case Hardened Steel Material Specification
- T20 Drive Size
- Delta Protekt® Finish
- 2.9mm Head Height (H)
- No.8 (4.2mm) Thread Size
- 7.9mm Head Diameter (D)
- 2 Way Removable Screw Fixing Type
- Entry Security Level (1) Security Level
Discover more about the Delta Protekt™ Security Torx Pan Head Self Drilling Screws range.
This type of 2-Way Security Torx Screw features a specialist self drilling tip, designed to penetrate and cut a thread into the housing material which can negate the need for a pre-drilled hole.
This Self Drilling Screw, also known commonly as a Tek Screw, is fitted with a 6-Lobe Pin (Torx Security) Drive. This combines the high torque benefits of a Torx drive with a security pin, preventing a standard torx bit from being used to remove the screw and enhancing the overall security of the fastener within the fixture.
The Pan Head of this Security Self Drilling Screw is free from sharp edges and provides a trim finish, which is one of the reasons this head type is commonly chosen for decorative applications. For a Countersunk Head variant of this torx security screw, see Accu’s range of Delta Protekt Security Torx Countersunk Self Drilling Screws.
Accu also lists Stainless Steel Torx Pan Head Self Drilling Screws for applications which do not require enhanced security from a Pin Torx drive or a specialised hardened steel coating.
Security Torx Pan Head Self Drilling Screws in this range are manufactured from Case Hardened Steel with a Delta Protekt® finish.
With thread sizes ranging from No. 8 (4.2mm) to No.12 (5.5mm) and lengths from ½”(13mm) to 2” (50mm), Accu’s range of Torx Security Pan Head Self Drilling Screws are suitable for use in a wide range of applications.
Torx Security drive sizes T20, T25 or T27 can be used to install or remove these torx security screws, with each product page denoting the Pin Torx Bit, or Security Torx Key Wrench drive size, required in the technical specification.