No products
Buy Straight Shank ER Collet Chucks
What are Straight Shank ER Collet Chucks?
0.50mm-7mm ER11 Straight Shank Mini Nut Collet Chucks - 10mm x 100mm Shank
| ER | ER11 |
| Shaft Diameter (d) | 10mm |
| Shaft Length (L) | 100mm |
| Clamping Range (A) | 0.50mm-7mm |
| Head Length (H) | 25mm |
0.50mm-7mm ER11 Straight Shank Mini Nut Collet Chucks - 16mm x 160mm Shank
| ER | ER11 |
| Shaft Diameter (d) | 16mm |
| Shaft Length (L) | 160mm |
| Clamping Range (A) | 0.50mm-7mm |
| Head Length (H) | 22mm |
0.50mm-7mm ER11 Straight Shank Mini Nut Collet Chucks - 8mm x 55mm Shank
| ER | ER11 |
| Shaft Diameter (d) | 8mm |
| Shaft Length (L) | 55mm |
| Clamping Range (A) | 0.50mm-7mm |
| Head Length (H) | 25mm |
0.50mm-10mm ER16 Straight Shank Mini Nut Collet Chucks - 10mm x 100mm Shank
| ER | ER16 |
| Shaft Diameter (d) | 10mm |
| Shaft Length (L) | 100mm |
| Clamping Range (A) | 0.50mm-10mm |
| Head Length (H) | 37mm |
0.50mm-7mm ER11 Straight Shank Mini Nut Collet Chucks - 12mm x 100mm Shank
| ER | ER11 |
| Shaft Diameter (d) | 12mm |
| Shaft Length (L) | 100mm |
| Clamping Range (A) | 0.50mm-7mm |
| Head Length (H) | 25mm |
0.50mm-13mm ER20 Straight Shank Mini Nut Collet Chucks - 16mm x 55mm Shank
| ER | ER20 |
| Shaft Diameter (d) | 16mm |
| Shaft Length (L) | 55mm |
| Clamping Range (A) | 0.50mm-13mm |
| Head Length (H) | 38mm |
0.50mm-10mm ER16 Straight Shank Collet Chucks - 20mm x 50mm Shank
| ER | ER16 |
| Shaft Diameter (d) | 20mm |
| Shaft Length (L) | 50mm |
| Clamping Range (A) | 0.50mm-10mm |
| Head Length (H) | 31mm |
0.50mm-16mm ER25 Straight Shank Collet Chucks - 16mm x 70mm Shank
| ER | ER25 |
| Shaft Diameter (d) | 16mm |
| Shaft Length (L) | 70mm |
| Clamping Range (A) | 0.50mm-16mm |
| Head Length (H) | 46mm |
What are Straight Shank ER Collet Chucks?
Straight Shank ER Collet Chucks are particularly useful for extending the reach of a lathe or milling machine. They feature a non-tapered shank for use with certain straight shank machinery.
Straight Shank ER Collet Chucks mount to the working side of a lathe spindle in the same way as a three-jaw chuck. ER Collet Chucks of this type use the machine’s existing hydraulic cylinder and drawtube for actuation. The installation of an ER Collet Chuck usually requires the fitment of an intermediate adapter between the drawtube and chuck to compensate for position and thread disparities. These can be found in Accu’s ER Collets range.
Morse Taper ER Collet Chucks are particularly advantageous for turning at especially high amounts of spindle rpm.
Bespoke Straight Shank ER Collet Chucks Manufacture
High precision, bespoke manufacture of Straight Shank ER Collet Chucks to customer specification. State of the art facilities specialising in both small batch prototyping and large scale manufacture.
Get A Quote